Eagtac M Series MX25L3-C Powerfull Compact LED Flashlight

The Eagtac M Series MX25L3-C Powerfull Compact LED Flashlight is here at Opticsforyou.com and as usual we offer fantastic deals !

Purchase your new Eagtac M Series MX25L3-C Powerfull Compact LED Flashlight from Opticsforyou.com today and you will appreciate the easy checkout process, fantastic customer service, Free Shipping policy and information on easily tracking your order.

Reliability that you can count on

We design this circuit to survive the toughest torture environment including: 1) repeatedly over-night burn-in test w/ minimal cooling, 2) over input voltage test of up to 20V, 3) over-driven output current test of up to 5.5A, and 4) high temperature bake test.

Our experienced electronic engineers ensure all components are working at its maximum efficiency and highest stability with the optimally planned and implemented circuit pcb layout. All chosen electrical components in this circuit design have good amount of headroom to ensure high stability in long term usage.

Inside the C5000 ST

Base on higher voltage platform than competitor's design, our C5000 ST circuit regulates the MT-G2 LED output until the very last drop of energy. Our highly efficient wide voltage buck current regulated circuit controls the precious amount of current that goes through the LED at all output levels. This results in constant brightness output regardless of LED variation, battery voltage, and temperature change. Our smart EMI management and quick soft-start design provide clean electricity to power the LED with enhanced service life.

We utilize low RDS(on) high power external mosfets, rugged & shielded power inductor, low ESR 50V X7R ceramic capacitors, and low resistance 2 oz copper PCB for maximum efficiency. This also lower required input voltage to current regulate the LED at maximum output when the battery voltage is near the LED forward voltage.

The microprocessor is programmed to provide handy and easy-to-use interface for users. When the flashlight is turned off, it shuts off all unnecessary components and waits for response to user command at very low standby current (uA).

Excellent runtime & efficiency

We use highly precise operating amplifier with very low offset voltage to control the output current. This allows MX25L3 Compact to run for x+ hours on its lowest brightness level and constant regulate all output levels without LED flicking.

At its highest brightness output, MX25L3 Compact runs for 1.6 hours using three EAGTAC 18650 3400mAh batteries with energy saving feature enabled. The circuit is also designed to handle six 3V primary CR123A batteries with the same great efficiency.

We strive to offer the brightest and the most efficient flashlight in the market regardless of added cost. Professional reviewers found our lights to be one of the brightest with their integrated sphere and lux meter. They typically report up to 20%-30% more runtime than other competitors during their runtime test. We believe performance and function come before fancy appearance.

Maximum lumen output

LED lumen

6 x XP-G2 S2 (CRI-70): 35001-2820/1386/250/30

6 x Nichia 219 D220 (CRI-92): 25501-2060/1010/190/25

ANSI lumen2

6 x XP-G2 S2 (CRI-70): 24501-2065/1010/180/23

6 x Nichia 219 D220 (CRI-92): 18101-1545/760/145/19

Energy saving technology

1) This feature prolongs turbo output runtime, by reducing output current by 25% after 200 seconds at turbo mode. With this feature disabled by user, it reduces output current by only 10% after 200 seconds at turbo mode for higher output.

2) ANSI FL-1 lumen is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC ANSI FL-1 Lumen output is measured using a calibrated integrated sphere one minute after turning on the flashlight.

Cool White LED

6 x XP-G2 S2 (CRI-70) 6500K

Neutral White LED

6 x Nichia 219 D220 (CRI-92) 4500K

MX25L3-C is the first EAGTAC flashlight to feature the unique Nichia 219 D220 CRI-92 SW45 LED. This custom made Nichia LED is the world brightest high CRI LED you can get with neutral white color tint (4500K). Other regular high CRI LED has orangish warm color (3000K).

XM-L2 and MT-G2 and CREE are registered trademark of CREE Inc. Nichia is a registered trademark of Nichia Corporation.

Color tint selection

Cool White LED

The six CREE top binned XP-G2 S2 LED give you maximum output. The smaller emittor die in the XP-G2 S2 LED givves you longer beam distance.

Neutral White LED

If you need awesome beam output out in the woods, or areas with a lot of green vegetation, use our neutral white LED as it offers higher CRI (Color rendering index). Neutral white LED renders color like the sun in the afternoon. This gives you better color rendition and more accurate color relative to cool white LED.

The high CRI Nichia 219 D220 LED is so awesome that when you point the flashlight on a colored object, it almost does not alternate its original color and making it even more appealing. If lumen represents the quantity of light, CRI is definitely one of the most important aspect to define the quality.

CREE XP-G2 S2 LED

This S2 LED is the brightest XP-G2 LED available and it's very hard to come by. The new CREE SC3 technology platform allows the second generate XP-G LED is squeeze 15-20% more output compared to its predecessor. It pushes performance limits to redefine lumen levels and outstanding lumen/watt efficiency (over 184 lumen/watt at 300mA). Instead of using overlapping single piece reflectors, The MX25L3-C opts for costly six individual aluminum reflector for greater output efficiency, longer beam distance, and better beam shape.

(Cool white LED beam profile shown) Neutral white XP-G2 LED shares the same beam profile in neutral white color tint.

High CRI Neutral white LED

We offer two great choices for the neutral white LED lover. Choose the CRI-92 Nichia 219 D220 LED for maximum CRI index and best light output quality, or the CRI-75 CREE XP-G2 S2 LED neutral white LED for maximum output. Both LED come in great color temperature of 4500K.

Features of Eagtac M Series MX25L3-C Powerfull Compact LED Flashlight:

• Clicky on/off side switch & Twisty head
• Easy on/off operation
• Turn on the light by press and release the on/off button switch (Included Accessories:
• Mil-Spec Para-cord Lanyard w/ quick attachment clip

Package Contents:

• Eagtac M Series MX25L3-C Powerfull Compact LED Flashlight