Tap Tap to Zoom
Unfortunately Thermal Eye 2400xp Advanced II IR Camera Pan and Tilt 9HFOV is not listed by OpticsForYou.You can also explore other items in the Thermal Imaging Accessories yourself to try and find the perfect replacement for you!
The Thermal Eye 2400xp Advanced II IR Camera Pan and Tilt 9HFOV is here at Opticsforyou.com and as usual we offer fantastic deals !
Purchase your new Thermal Eye 2400xp Advanced II IR Camera Pan and Tilt 9HFOV from Opticsforyou.com today and you will appreciate the easy checkout process, fantastic customer service, Free Shipping policy and information on easily tracking your order.
Thermal Eye 2400xp Advanced II IR Camera 1000638-100 with Pan and Tilt uses a dual camera system for visible detection and infrared detection. Thermal imaging cameras are often susceptible to solar damage and cannot handle high intensity heat sources; the Thermal Eye 2400xp features BST (Barium-Strontium Titanate) so it can be placed in the optimal position to maximize security regardless of where the sunlight is shielded.
The Thermal Eye 2400 XP provides visible and thermal imaging capable of human detection up to 1800 meters and has a 9° horizontal FOV. The 2400XP Advanced II Thermal Camera by Thermal Eye can be integrated into an existing security system easily and effectively. Thermal Eye thermal imaging devices are built to last, even in tough environments.
Thermal Imaging Camera | ||
---|---|---|
Material & Structure: | Uncooled - 320 x 240 | |
Spectral Response: | 7-14um (filter bandwidth) | |
Sensitivity: | ≤ 100mK (detector) | |
Frame Rate: | 30Hz NTSC/25 Hz PAL | |
Start-Up Time: | ~30 seconds (typical) | |
Contrast/Brightness: | Automatic or Manual (Gain, level and polarity can be remotely controlled) | |
Lens Options: | 100mm f/1 | |
Field of View (HxV): | 9° x 6.6° | |
Zoom: | Electronic zoom 2x with Peaking and Interpolation | |
Range to Detect Human Activity: | 100mm / 3700ft (1128m) | |
Focus Method: | Electronic focus | |
Visible Camera | ||
Material & Structure: | 1/4 type Super HAD CCD | |
Spectral Response: | 350nm-740nm | |
Sensitivity: | 1.0 lux (0.01 low light) | |
Start-Up Time: | ~30 seconds (typical) | |
Contrast/Brightness: | Automatic or Manual (recommended illumination - 3.0 to 100,000 lux) (minimum illumination - 0.01 lux) | |
Lens Options: | 2.4mm (wide); 6.0mm (tele) | |
Zoom: | 26x optical zoom plus 12x digital zoom | |
Focus Method: | Electronic focus (automatic flicker compensation & focusing system) | |
Both | ||
Video Output Format: | NTSC or PAL | |
Video User Configured: | One video output to be used with remote switching between dual-sensor head output from control system or two simultaneous video outputs | |
Input Voltage: | 12 to 32VDC, Regulated | |
Input Power: | ~100 watts nominal, Peak 200 watts | |
Communications Protocol: | Pelco D (RS-422/Rs-485 4 Wire Full Duplex) IP Addressability Option (Pan & Tilt Control) | |
Communication Speeds (Baud rate): | 2400, 4800, 9600 (factory set) | |
Operating Temperature (Ambient air temperature): | -40°F to + 167°F (-40°C + 75°C) - Heater engaged | |
Storage Temperature: | -4°F to + 140°F (-20°C to 60°C) - Visible camera limitation | |
Weatherproofing: | Ingress Protection Rating IP66 | |
Size: | 19.4"Lx20.7"Wx18.6"H (49.3cm x 52.6cm x 47.2cm) | |
Color: | White with Black Pedestal | |
Weight: | 50lbs (23kg) with pan/tilt | |
Monitor Type: | 2-phase precision stepper | |
Pan Azimuth Range: | 360° continuous (slip ring) | |
Pan Speed Range: | .01°/second to 80°/second (proportional speed control with joystick) | |
Tilt Elevation Range: | 190° (± 95° from horizon) | |
Tilt Speed Range: | .01°/second to 50°/second (proportional speed control with joystick) | |
Accuracy: | .25° | |
Digital Directional Readout: | Azimuth & Elevation in degrees | |
Presets: | 99 (Azimuth, Elevation, Thermal Zoom, Visible Zoom for each preset) |