Evolution Gun Works Leupold DeltaPoint Pro Sight Blank Mount 49422

The Evolution Gun Works Leupold DeltaPoint Pro Sight Blank Mount is here at Opticsforyou.com and as usual we offer unbelievable prices and discounts !

Purchase your new Evolution Gun Works Leupold DeltaPoint Pro Sight Blank Mount from Opticsforyou.com today and you will appreciate the easy checkout process, fantastic customer service, Free Shipping policy and information on easily tracking your order.

This mount is a gunsmith fit mount that needs to be machined to fit the dovetail of your choice.

Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

NOTE: For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.

Installation Instructions:

• Remove the rear sight
• Install the EGW Sight Mount in the dovetail
• Tighten set screw (if applicable)
• Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
• Apply blue Loctite to the provided mounting screws
• Torque mounting screws to 15in/lbs

The screws that are included with this mount require a 5/64'' allen wrench for installation.

Specifications for Evolution Gun Works Leupold DeltaPoint Pro Sight Blank Mount:

Features of Evolution Gun Works Leupold DeltaPoint Pro Sight Blank Mount:

• Fit Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima, Holosun 407K/507K (the rear pins on the mount must be removed for the Holosun 407K/507K to sit on the mount)

Package Contents:

• Evolution Gun Works Leupold DeltaPoint Pro Sight Blank Mount