EAGTAC P Series P20C2 LED Flashlight w/ Free Shipping and Handling — 2 models

The EAGTAC P Series P20C2 LED Flashlight is here at Opticsforyou.com and as usual we offer unbelievable prices and discounts Up to $4.00 Off!

Purchase your new EAGTAC P Series P20C2 LED Flashlight from Opticsforyou.com today and you will appreciate the easy checkout process, fantastic customer service, Free Shipping policy and information on easily tracking your order.

EAGTAC adopts current regulated high efficiency circuit to manage current that goes through the LED.

Maximum 100+ hours runtime

P20C2 MKII runs for 100 (and up) hours on its lowest brightness level. The current regulated and non-PWM dimming circuit design allows constant and non-flashing output throughout its runtime for all output levels.

At turbo mode (highest brightness level), P20C2 MKII current regulates for 1.5 hours using two EAGTAC CR123A batteries (XM-L2 version runs for 1.2 hours at turbo due to higher output current).

C2100 V circuit

We use current regulation method to control the amount of current going through the LED for all output levels. This results in constant brightness output regardless of battery type, LED model, and temperature/voltage change.

The XP-G S2 version uses C1500 V circuit, which essentially shares the same design, but with lower current to best suit the XP-G LED requirement.

Green design

We only use RoHS compliant and lead-free components to build our circuits and products.

We also work hard to offer environmentally friendly green packaging (such as smaller package for lower transit cost, recyclable PET label/container, and eco-friendly cardboard outer package).

High lumen output

LED lumen

XM-L2 U2: 8501-636/126/10

XP-G2 R5: 5301-397/113/10

ANSI FL-12 lumen

XM-L2 U2: 6221-470/101/8

XP-G2 R5: 3861-315/89/8

Turbo boost technology

1) Turbo boost technology is activated every time you turn on at turbo output setting for maximum brightness. It lasts for three minutes and then it reduces its regulated output by 20% to prolong runtime.

2) ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTACs ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight.

CREE XM-L2 U2 LED

Cool White output

This gives you the maximum brightness output in its class. Our XM-L2 U2 LED offers 850 LED lumen at turbo mode with industrial leading efficiency (175+ lumen/watt at general mode).

Neutral White output

If you need awesome beam output out in the woods, or areas with a lot of green vegetation, use our neutral white LED as it offers higher CRI (Color rendering index) compared to cool white LED. Neutral white LED renders color like the sun in the afternoon. Neutral white LED is approximately 7% dimmer than our top binned cool white LED, but it's well worth the ability to see the real color of your surrounding.

Color tint selection

Cool White LED

This allows you to view the object with maximum brightness output and gives you maximum beam distance.

Neutral White LED

This gives you better color rendition and more accurate color relative to cool white LED.

Beam distance

The P20C2 MKII reflector design allows you to view object up to - yards/- meters at turbo output with XP-G S2 LED. The XM-L2 U2 LED verion offers 175 yards/160 meters beam distance.

Reflector

P20C2 MKII uses polished aluminum reflector with super low textured reflector for maximum output and a pleasing beam.

Specifications for EAGTAC P Series P20C2 LED Flashlight:

Features of Eagtac P Series P20C2 LED Flashlight:

• Tactical forward clicky switch + head twisty
• Easy and Trusty operation
• Slighly press the tailcap button for momentary on/off
• Turn the flashlight by pressing the tailcap button until it clicks
• Click again to turn it off.
• Hold the body and tighten the head to enable turbo output
• Loosen the head to enable general output mode
• You can pre-select output setting before turning on.
• To access hidden low and auxiliary modes
• with the head loosen
• tighten and loosen the head within one second to activate the hidden settings
• It starts from low output mode
• repeat the action for strobe (10hz)
• hi-flash (1.7hz)
• and SOS modes.
• Turbo boost technology is activated every time you turn on at turbo output setting for maximum brightness
• It lasts for three minutes and then it reduces its regulated output by 20% to prolong runtime
• Its normal for the light to get warm at such level
• Do not leave the light running unattended.
• Gorgeous Knurling.
• Supreme handling.
• The CNC precisely cut and rolled rectangle-shape and square-shape knurling provides a sure grip throughout the entire flashlight body.
• Reverse polarity protection
• Your safety is our first priority
• Inserting battery in the wrong direction may lead to serious damage to the flashlight and the battery
• We incorporate a physical structure to protect against reverse polarity without compromise (battery with a protruding button top is required).
• Smart head design.
• Excellent thermal path
• The one piece LED module and custom LED star board with highly thermal conductive isolation layer allow the LED to dissipate heat quickly to the outside world
• This result in higher output and longer LED life (LED dims as junction temperature increases).
• Durable structure against drop impact
• The stainless steel bezel provides highly drop resistance and make it easier to shatter window as needed
• O-ring is used as cushion to protect and waterseal the harden waterwhite glass lens (with both sided anti-reflective)
• Paracord lanyard.
• Carry the mil-spec paracord lanyard with or without the pocket clip.
• Stainless steel pocket clip.
• The titanium coated stainless steel pocket clip clips on almost everywhere
• To remove it
• with tailcap and body tube o-ring removed
• loose the clip retainer ring and pull the clip
• Ensure the clip retainer ring is fasten securely
• otherwise the light may not light up.
• Tail-stand ability.
• Light candle.
• With the pre-installed lanyard ring removed (use any sharp tool to remove the lanyard ring from the tail-cap)
• install the included tail-stand rubber
• Place the flashlight on any flat surface to light up the surrounding.
• Included Accessories:
• Tail-stand rubber boot
• Mil-Spec paracord lanyard w/ quick attachment clip
• Heavy duty nylon holsterw/ self-retention device and flip

Package Contents:

• EAGTAC P Series P20C2 LED Flashlight