Your Browser is OutdatedAEMC K100 DC/AC MicroProbes - Current Probe
Tap Tap to Zoom
Product Discontinued by Manufacturer
AEMC K100 DC/AC MicroProbes - Current Probe has been discontinued by AEMC and is no longer available. Our product experts have helped us select these available replacements below.You can also explore other items in the Dry Box Accessories yourself to try and find the perfect replacement for you!
Product Info for AEMC K100 DC/AC MicroProbes - Current Probe
The AEMC K100 DC/AC MicroProbes - Current Probe is here at Opticsforyou.com and as usual we offer fantastic deals !
Purchase your new AEMC K100 DC/AC MicroProbes - Current Probe from Opticsforyou.com today and you will appreciate the easy checkout process, fantastic customer service, Free Shipping policy and information on easily tracking your order.
The AEMC K100 Current Probe can detect electrical current as low as 100µA in either AC or DC. This current probe has a proportional 1mV/mA output for direct readings on DMMs, loggers and oscilloscopes with no need for probe ranging or signal filtering, and is designed for low-current applications. Small size, long battery life, easy operation, and extreme sensitivity make the AEMC Current MicroProbe a fine choice for anyone who deals with small current measurements. The AEMC Instruments K100 AC/DC Electrical Current Probe has innumerable applications from industrial to seafaring and military uses.
Specifications for Zero Point EAP Expedient Action Pocket:
| Electrical: | ||
|---|---|---|
| Nominal Range: | 0 to 3 Arms / o to 4.5 Adc | |
| Measurement Range: | 0 to +- 4.5A | |
| Output Signal: | <100uV, DC to 3kHz | |
| Accuracy (4.5A range) AC: | +-2.0% of Reading +- 200uA | |
| Accuracy (4.5A range) DC: | +-1.0% of Reading +- 200uA | |
| Overload: | Red LED indicates momentary or continuous overload | |
| Frequency Range: | DC to 2kHz (@ -3dB sine) | |
| Load Impedance: | 200 ohms | |
| Working/Common Mode Voltage: | 300V, EM 61010-1, Cat. II | |
| Battery: | 9V Alkaline, NEDA 1604, 6LR61 or IEC 6 LF22 (Approx. 20 hours life) | |
| Output Termination: | 4mm Safety Banana Plugs | |
| Mechanical: | ||
| Operating Temperature: | -14 to 131 F (-10 to 55 C) | |
| Storage Temperature: | -40 to 176F (-40 to 80 C) | |
| Operating Relative Humidity: | <95% @ <35 C, 75% @ 55C | |
| Zero Adjustment: | +-25mA approximate by 10 turn knob at base of case | |
| Maximum conductor size: | 3/16", 0.180" (4.5mm) | |
| Dimensions: | Probe, 4.4 x 0.6 x 1" (111x15x25mm); Electronic module | |
| Weight: | 9 oz (250g) | |
| Safety: | ||
| Electrical: | EN 61010-2-32 | |
| Double Insulation: | Yes | |
| CE Mark: | Yes | |
Features of AEMC Instruments DC/AC Microprobe Model K100:
- Measures extremely low level DC from 100mA
- Outputs signal proportional to total current (DC + AC)
- Low noise
- Ultra-compact size and non-contact clamp-on convenience
- Simple plug-in operation
- Designed for use with DMMs and oscilloscopes
- Accurate display of waveforms
- No range or mode (AC/DC) switching required
- Extended battery life
- Red LED indicated momentary or continuous overload
- Green LED indicates power and battery condition
Applications of the AEMC MicroProbe K100:
- Industrial process controls (4 to 20mA current loops)
- Electronic circuit design, testing and repair
- Automobile wiring and engine control systems
- Avionics systems maintenance and repair
- Shipboard maintenance and repair
- Fault and signal location in complex networks
- Ground and leakage current measurement
- Pre-deployment testing of power-conscious equipment
Package Contents:
- AEMC K100 DC/AC MicroProbes - Current Probe
